NEW PRODUCTS!

 

KCT855 Texas Twister Air Hammer Pulling Kit
KCT855


  • Now you can convert your air hammer into a pneumatic slide hammer with the Texas Twister.
  • Simply snap the Texas Twister curved air bit into the collet of your hammer with one of the bits attached. Reverse the air hammer handle in your hand now using thumb to push the hammer trigger. Feel the 3000 air hammer blows per minute tuning into new pulling power.
  • One hand operation allows you to hold parts with your other hand.
  • Safe controlled part removal without parts and fluids crashing to the floor.
  • Utilize air hammer pulling power where slide hammers won’t fit.
  • Extend the reach of the tool by using the 20” extension.
  • Use the double ended female ½-20 connector bar to connect the Texas Twister to your current pullers.
  • TEXAS TWISTER - safe, powerful, fast, simple effective air hammer bits you will use every day.
  • Patent Pending

KCT855

Click / Scan the above for Video
KCT4180 MERCEDES “A” WHEEL LOCK MASTER KEY SET
KCT4180


  • 30 piece kit works 2006-present MERCEDES factory wheel lug nut locks
  • Factory duplicate - uses same factory part numbers
  • NO WARRANTY - CAN’T BE USED WITH AN IMPACT GUN
  • NOTE: The MERCEDES “B” set is the same as the KCT4165 BMW kit
    shown below. The two kits together will work on all MERCEDES vehicles

KCT4175 Audi Wheel Master Lock Set
KCT4175


  • The KCT4175 is a 20 piece factory duplicate master wheel lock key set for the removal of 2006-2016 Audi factory wheel lugnut locks
  • Identical to factory set - uses same factory part numbers.
  • Comes packaged in a custom blow molded carrying case.

KCT4170 Porsche Wheel Master Lock Set
KCT4170


  • The KCT4170 is a 20 piece factory duplicate master wheel lock key set for the removal of 2006-2016 Porsche factory wheel lugnut locks.
  • Identical to factory set - uses same factory part numbers.
  • Comes packaged in a custom blow molded carrying case.

KCT4165 BMW 2nd Generation Wheel Lock Master Key Set
KCT4165
  • 20 piece wheel lock master key set
  • Removes all 2nd generation 2012-present BMW wheel lugnut locks
  • Identical to factory set - uses same factory part numbers
  • Comes packaged in a custom blow molded case
KCT4160 BMW Wheel Lock Bolt Kit
KCT4160
  • Duplicate factory lugnut keys
  • 21 Piece BMW kit fits all internal spline drive locks
  • Includes anti-scratch nylon sleeved installer socket
KCT4155 VW/Audi 2nd Generation Wheel Lock Master Key Set
KCT4155
  • 20 piece wheel lock master key set
  • Removes all 2nd generation 2012-present VW/Audi factory wheel lugnut locks
  • Identical to factory set - uses same factory part numbers
  • Comes packaged in a custom blow molded case
KCT4150 VW/Audi Wheel Lock Key Kit
KCT4150
  • 23 piece factory reproduced master wheel lugnut key/bolt kit
  • Works on all VW/Audi factory wheel lugnut locks
  • 22 piece splined lugnut bolts with nylon sleeved ½”drive 17mm drive socket
  • Priced at a fraction of factory supplied kit
KCT-1800 Offset Impact Driver Set
  • Offset 15˚ angle for greater access in tight areas
  • Recessed non-turning head well prevents driver slipping off stud or fastener
  • Extra-long extra heavy non-turning straight hammer won’t rotate off stud
  • Great for strut work, hub work, front end, exhaust, spring and suspension repair
  • Comes packaged in a heavy duty cordura nylon roll-up storage bag
  • Patent pending

  • 4 piece set includes:

         410 – Offset Shaft Impact Driver
         530 – Offset Shaft Impact Driver
         725 – Offset Shaft Impact Driver
         990 – Straight Shaft Impact Driver
KCT1810 Offset Impact Driver Starter Set
KCT1810


  • 725 driver has 15° offset .812 machined recessed well head to capture hard to reach bolts (Dodge hub bolts). Non-turning slots..
  • 990 short straight 1” hammer head driver won’t rotate off bolt/work area with non-turning slots.
  • Great for strut work, hub work, front end, exhaust, spring and suspension repair.
  • Comes packaged in a heavy duty roll-up cordura nylon storage bag.

KCT1820 3 Piece Offset Impact Driver Starter Set
KCT1820


  • 725 driver has 15° offset .812 machined recessed well head to capture hard to reach bolts (Dodge hub bolts). Non-turning slots.
  • 990 short straight 1” hammer head driver won’t rotate off bolt/work area with non-turning slots.
  • Great for strut work, hub work, front end, exhaust, spring and suspension repair.
  • Comes packaged in a heavy duty roll-up cordura nylon storage bag.

KCT1830 2 Piece Non-Turning Hammer/ Impact Hammer Driver Set
KCT1830


  • 990 straight 8” long non-turning slotted air hammer and 990SHT straight 6" short non-turning slotted air
  • Non-turning machined slots won't rotate off work
  • Comes packaged in a heavy duty roll-up cordura nylon storage bag.

KCT895 Eaton Truck Brake Spring Tool
KCT895


  • The KCT895 easily installs Eaton air brake shoe anchor springs.
  • Universal fit for all Eaton air brake shoe anchor springs.
  • FAST - EASY - SAFE

KCT890 Truck Brake Spring Tool
KCT890

  • Easily connects rear drum brake return springs
  • Easy one hand operation
  • Slotted ends on tool always hold spring at correct work angle
  • No need to leverage tool against a solid surface during spring installation
  • FAST EASY SAFE

KCT1350 Lug Ripper II
KCT1350
KCT1350
  • Don't torch damaged/frozen lugnuts off just drill out the lugnut/stud threads only in 11 minutes or less without damaging rim
  • Easily replace damaged lug nut/stud with threads now removed
  • Doesn’t drill out the whole lug nut - just the threads
  • Available NOW from your local mobile tool dealer/distributor
  • 16mm Tungsten steel drill bit w/4 carbide cutters allow for speed & durability
  • Comes with a locking collar clamp for safety
  • Includes 4 drill guides
  • Packaged in a custom blow molded case
  • Patent Pending

                                          Play Movie


KCT830A Universal Hub Shocker Wheel Bearing Hub Removal Tool
KCT830A
  • Safely remove all frozen hubs instantly
  • Universal fit mounts to all axle bolted hubs - 5, 6 & 8 lug hubs
  • Mounts to two studs using supplied flanged nuts in seconds
  • Use with 5 lb. hammer to knock frozen hubs out of axles
  • Flanged nuts included for improved safety and performance
  • Ideal for Dodge and other HD trucks
  • Two mounting holes in 3/4” steel back plate
  • 1/4” steel square tubing and striking plate
  • Will not damage axle

KCT825D Roller Rod Paintless Dent Removal Kit
KCT825D
  • Roller rod paintless dent removal technology
  • Finally a PDR made easy for you to master
  • Seven interchangeable tips and five stainless steel rods
  • 35 rod & tip combinations
  • Includes a get started training DVD
  • Custom blow molded carrying case
  • A new PDR profit center for any auto tech

KCT845 Tire Wheel Weight Hammer
KCT845
  • “Patent Pending” hammer inside a hammer design
  • No more pinched fingers
  • Cock and fire inside hammer to mount wheel weight hands free
  • Non marring nylon & aluminum tips
  • Spring loaded clip removes any size wheel weight
KCT993 Brake Line/Brake Cylinder Fitting Re-Threading Kit
KCT993
  • Rethread damaged male and female brake fittings
  • Compact dual design male/female combo sockets
  • Rethread damaged brake fitting on vehicle
  • Works on vehicles where standard tap & dies won’t fit
  • Quick and easy applications on car
  • Most common sizes - 3/8 - 24
  •                                           7/16 - 24
  •                                           1/2 - 20
  •                                           5/8 - 18
  •                                           10mm - 1.0
  •                                           12mm - 1.0
KCT4980 12 Point Socket Euro/Asian Axle Nut Kit
Audi - BMW - Mercedes - VW - Lexus - Toyota
KCT4980
  • 4 - 12 point ½”drive molybdenum impact sockets - 24mm
                                                                                            30mm
                                                                                            32mm
                                                                                            36mm
  • Convenient packaged dedicated German/Asian axle nut kit
KCT4990 5 Socket Euro Specialty Axle Nut Kit
AUDI - VW - MERCEDES ML
KCT4990
  • Easy to use dedicated kit for German vehicle axle nuts
  • M18 ½”drive chrome molybdenum impact socket for rear wheel bearing assemblies on
    VW Golf/Jetta and other M/C 5 chassis for VW/Audi
  • E24 ½”drive chrome molybdenum impact socket for Mercedes ML axles
  • 9mm - 17mm - 14mm ½”hex drive sockets for internal drive axle nuts on Audi/VW vehicles
KCT599   9 Piece Metric Shockit Socket Kit
KCT599

  • Shock loose frozen nuts and bolts
  • Ideal for hard to reach work areas
  • Custom punch designed for air hammer use
  • Includes 9 popular metric sizes
       10mm - 11mm - 12mm
       13mm - 14mm - 15mm
       16mm - 17mm - 19mm
  • Custom see-through blow molded case
KCT840 Air Hammer Wrench Driver
KCT840

  • Use your air hammer to drive your wrenches in difficult and hard to reach areas
  • Use on crank pulley bolts, fan clutches, and any inaccessible bolt or fastener
  • Long reach - 19.5”
  • Fits any wrench
  • Patent Pending

KCT-960 Dual Tire Inflator
KCT960

  • Two four foot hoses with lock-on air chucks
  • The pre-settable regulator/gauge allows the user to "Set-It & Forget It"
  • Allows the user to inflate two tires at a time automatically
  • Ideal for large truck tires